BRAMPTON PRO-FIX QUICK CURE 5 MINUTE EPOXY
PRO-FIX
QUICK CURE is a toughened medium-viscosity impact resistant two part epoxy that
gives the strength of long cure adhesives. Quick Cure has a gel time of 5-8
minutes and a playable strength within 20-30 minutes at standard temperature
(allow longer time for colder
temps).
Follow the FIVE STEP
MIXING PROCEDURE to ensure proper bond.
-
Superior bond strength on all shaft types
-
Very easy to use squeeze bottle
-
1:1 mix ratio by volume
-
Set in 5 minutes,
Cure in 20-30 minutes
-
Easy cleanup
5 STEP MIXING PROCEDURE
|
1
|
Dispense equal amounts of part A & B by volume. For Pro-Fix
5&10, dispense only enough for one use.
|
|
|
2
|
Mix thoroughly until product has a uniform color.
|
|
|
3
|
Thoroughly coat the inside of the hosel with a round dowel or
suitable applicator.
|
|
|
4
|
Spread a thin layer over the tip prepared (grit-sanded) shaft.
Examine for complete coverage.
|
|
|
5
|
Insert shaft
into hosel with a slight twist and align. Clean excess adhesive off with
alcohol towelete. Leave undisturbed to cure.
|
|
ADDITIONAL INSTRUCTIONS FOR PRO-FIX QUICK CURE 5
Quick
setting adhesives have their own characteristics and must be used accordingly.
Please follow these directions for best results.
-
Dispense only the amount you can use in two
minutes.
-
Mix briefly but thoroughly.
-
Do NOT remix the material at any time during
use.
-
Do NOT continue to use mixed product that has
started to set or become gelled.
-
Do NOT move club while curing.
Following
these instructions will give the maximum performance of
PRO-FIX QUICK CURE 5 adhesive.
Material that is over-mixed or used after cure is initiated will result in a reduction
of properties and performance.
