 | Newsletter |  |
|
About US
Terms & Conditions
Privacy Policy
Testimony
Trimming Instructions
Resource Websites
|
 |
| Product Detail |
|
5 Minute Easy Dispense Dual Cartridges:
The 5 minute adhesive with the strength,
toughness and impact resistance of a 24 hour curing product. Bonds made with
5 minute Epoxy achieve playable strength within 10-20 minutes at standard
temperature (allow longer time for colder temps).
5 Minute Easy Dispense
Dual Cartridges gives
you the technology to make high quality, rapid bonds and get customers back on
the course. Follow the FIVE STEP
MIXING PROCEDURE to ensure proper bond. Please note the additional
mixing information to ensure maximum performance.
- Superior bond strength on all shaft types
- Very easy to use
- Double-barreled tube dispenses an exact 1:1 mix.
- 100% cure in 10-20 minutes
- Easy cleanup
5 STEP MIXING PROCEDURE
|
1
|
Dispense equal amounts of part A & B by volume. For 5 minute
epoxy, dispense only enough for one use.
|
|
|
2
|
Mix thoroughly until product has a uniform color.
|
|
|
3
|
Thoroughly coat the inside of the hosel with a round dowel or
suitable applicator.
|
|
|
4
|
Spread a thin layer over the tip prepared (grit-sanded) shaft.
Examine for complete coverage.
|
|
|
5
|
Insert shaft
into hosel with a slight twist and align. Clean excess adhesive off with
alcohol towelete. Leave undisturbed to cure.
|
|
ADDITIONAL INSTRUCTIONS FOR 5 MINUTE EPOXY
Quick
setting adhesives have their own characteristics and must be used accordingly.
Please follow these directions for best results.
-
Dispense only the amount you can use in two
minutes.
-
Mix briefly but thoroughly.
-
Do NOT remix the material at any time during
use.
-
Do NOT continue to use mixed product that has
started to set or become gelled.
-
Do NOT move club while curing.
Following
these instructions will give the maximum performance of adhesive.
Material that is over-mixed or used after cure is initiated will result in a reduction
of properties and performance.
| | Show Related Products |
|
