 | Newsletter |  |
|
About US
Terms & Conditions
Privacy Policy
Testimony
Trimming Instructions
Resource Websites
|
 |
| Product Detail |
|
24 Hours
Easy Dispense Dual Cartridges:
24 hours easy
dispense dual cartridges
forms a tough off white bond line that provides very high impact resistance and
shear strength. The two component adhesive is mixed 1:1 by volume and has a
20-30 minute work life and a 20 hour cure at room temperature.
This product is our best seller because of its outstanding performance and
versatility, gives aerospace quality bonds at an affordable price.
Follow the
FIVE STEP MIXING PROCEDURE to ensure proper bond.
-
Superior Structural Properties
-
Very High Impact Resistant
-
Excellent Adhesion on Steel, Graphite, Titanium,
Composites
-
Full Performance from -50F to 180F
-
Easy cleanup
5 STEP MIXING PROCEDURE
|
1
|
Dispense equal amounts of part A & B by volume, dispense only enough for one use.
|
|
|
2
|
Mix thoroughly until product has a uniform color.
|
|
|
3
|
Thoroughly coat the inside of the hosel with a round dowel or
suitable applicator.
|
|
|
4
|
Spread a thin layer over the tip prepared (grit-sanded) shaft.
Examine for complete coverage.
|
|
|
5
|
Insert shaft
into hosel with a slight twist and align. Clean excess adhesive off with
alcohol towelete. Leave undisturbed to cure.
|
|
ADDITIONAL INSTRUCTIONS:
Quick
setting adhesives have their own characteristics and must be used accordingly.
Please follow these directions for best results.
-
Dispense only the amount you can use in two
minutes.
-
Mix briefly but thoroughly.
-
Do NOT remix the material at any time during
use.
-
Do NOT continue to use mixed product that has
started to set or become gelled.
-
Do NOT move club while curing.
Following
these instructions will give the maximum performance of the adhesive.
Material that is over-mixed or used after cure is initiated will result in a reduction
of properties and performance.
| | Show Related Products |
|
